Sain Smart TPU 0.8kg (Pink) | 3D Printers | 3D Printers | 3D Printers & Accessories | Printers & Scanners | Electronics & Computers | Makro Online Site
text.skipToContenttext.skipToNavigation
Login or Register
Get the tailored Makro experience. Login for faster checkout, online order tracking and more.
Sain Smart TPU 0.8kg (Pink) Product ID : SST009
of
×
Sain Smart TPU 0.8kg (Pink)

R 59900

UCount rewards  5990
Available online only
In stock
2 - 5 working days

Online Exclusive

This product is exclusive to online shopping and may only be purchased online as it is not stocked in-store.

3RD PARTY ITEM

This is supplied by Da Vinci Lab and may result in additional delivery fees.

Thermoplastic polyurethane (TPU) is a high strength flexible material. TPU belongs to the TPE class of thermoplastics. 

  • Flexible and High strength 95A hardness is simlar to an o-ring. High abrasion resistance and low compression compared to rubber
  • Resistant to chemicals  resist to oil, grease and etc. Durable performance even in chemical harsh environment.
  • Easy to print Excellent adhesion on heat bed, not necessary for extra adhesion like tape. Compatible with most 3D printers in market. Bowden extruders will need to print slowly. 
  • Great for end-use parts or models Can be used to print as functional parts or standalone prototypes. Like RC parts, case, or engineer design prototypes.

DESCRIPTION

SainSmart TPU filament is featured by its high strength and flexibility, like a hybrid of plastic and rubber.

95A TPU has high abrasion resistance and low compression compared to rubber parts, especially at higher infill. 

In comparison with most common filaments like PLA and ABS, TPU must be run much slower. 

SPECIFICATION

  • Material: Rep-Flex TPU - Vacuumed Sealed with desiccant
  • Shore Hardness: 95A
  • Weight: 1 KG (approximately 2.20 lb) Spool Weight Total, Net Weight 0.8 KG
  • Diameter: 1.75mm (+/- 0.05mm)
  • Roundness: 1.75mm (+/- 0.03mm)
  • Recommended extruder temperature:195 - 230°C
  • Recommended platform temperature: 40 - 60°C 

PRINTING TIPS

  • Recommended for printers with direct drive extruder, 0.4~0.8mm Nozzles.
  • With bowden extruder you might pay more attention to these tips:
  1.  Print slow 15-30 mm/s Printing speed
  2.  First layer settings. (Height 100% Width 150% speed 50% e.g.)
  3.  Retraction disabled. This would reduce messy, stringing or oozing printing result.
  4.  Increase Multiplier(Optional). set to 1.1 would help the filament bond well.
  5.  Cooling fan on after first layer.


Features
Model
SST009
Product/Packaging Information
Product Weight
1.4 kg
Product Dimensions
22cm(L) x 7cm(W) x 20cm(H)
Shipping Weight
1.4 kg
Shipping Dimensions
22cm(L) x 7cm(W) x 20cm(H)