This product is exclusive to online shopping and may only be purchased and returned online as it is not stocked in-store.
3RD PARTY ITEM
This is supplied by IOTREND and may result in additional delivery fees.
The Centurion 500mm Nylon Raz Rack is ideal for replacing sections of the pre installed Raz Rack or perhaps extending the length of the rack.
Suitable for sliding gates not exceeding 500kg and can be fitted with the following motors:
• Centurion D2
• Centurion D3
• Centurion D5
• Centurion D5 Evo
• Centurion D5 Smart
• ET Drive 300
• ET Drive 500
• Mounting holes are slotted for easy adjustment
• Interlocking pieces can easily be removed and replaced
• Universal for most sliding gates
• Silent gate operation
- Brand: Centurion
- Rack type: Interlocking
- Material: Nylon
- Length: 500mm
- Warranty: Manufacturers Carry in product warranty
INSTRUCTIONS FOR USE
MAINTENANCE AND CARE
• Check that all interlocking pieces are properly secured to the gate
• Inspect nylon teeth for worn out or broken tooth and replace sections if necessary
WARNINGS AND LIMITATIONS
• Ensure that the correct spacing is applied between the motor pinion and the rack to ensure a smooth opening and closing of the gate. Incorrect spacing will either result in pressure on the motor and gearbox when the spacing is to little or damage to the rack when the spacing is too much as the pinion will strip the rack or break pieces off.
WHAT'S IN THE BOX
1 x 500mm Centurion Nylon Raz rack
3 x Tex screws (8 x 25mm)