Lens Restoration Headlight repair kit Paste Polish for Headlight  (100 ml, Pack of 1)

Notes: The lens should be wet during the whole process; the order of using the grinding wheel: 800P 1200P 2000P. Failure to do so will result in failure to restore. Step 3: Polishing Put the orange sponge disc on the backing plate and apply the polishing paste to polish the lens until the gloss returns to its original state. Notes: For better results, please use an electric buffer or polisher. If it is polished by hand, it should be polished clockwise not less than 200 turns. Step 4: Maintenance Use the white sponge tray provided in the kit to apply the protective liquid evenly on the surface of the lens. After applying, leave for 10-15 minutes to allow the liquid to flow evenly, and then immediately dry it under direct sunlight (1 to 2 hours is recommended.) Otherwise, due to its viscosity, the protective liquid will adhere to dust and other dirt, thereby affecting the brightness of the headlights. Notes: When applying the product liquid on the headlights, be sure to avoid sunlight (important). Please clean the headlight lens and make sure the lens is dry before the maintenance procedure is completed. Please do not wash the car within 24 hours after the operation is completed. What's in the box 2 x P800 Sanding Discs 2 x P1200 Sanding Discs 2 x P2000 Sanding Discs 1 x Orange Sponge Disc 1 x White Sponge Disc 2 x Bags of Polishing Paste 2 x Bags of Protective Liquid 1 x Masking Tape 1 x M10 Backer Pad